Zoom room sleeper3/9/2023 ![]() (1) Except as provided in paragraph (c)(2) of this section, there must be a direct and ready means of exit from a sleeper berth into the driver's seat or compartment. A sleeper berth installed on or after Janumust be located in the cab or immediately adjacent to the cab and must be securely fixed with relation to the cab. (2) A sleeper berth located within the cargo space of a motor vehicle must be securely compartmentalized from the remainder of the cargo space. (1) A sleeper berth must not be installed in or on a semitrailer or a full trailer other than a house trailer. ![]() A sleeper berth must be constructed so that an occupant's ready entrance to, and exit from, the sleeper berth is not unduly hindered. A sleeper berth installed on a motor vehicle on or after Janumust be of generally rectangular shape, except that the horizontal corners and the roof corners may be rounded to radii not exceeding 101⁄2 inches. A sleeper berth must be at least the following size:ĭate of installation on motor vehicle Length measured on centerline of longitudinal axis (inches) Width measured on centerline of transverse axis (inches) Height measured from highest point of top of mattress (inches)1Īfter December 31, 1952, and before Octo75 21 21ġIn the case of a sleeper berth which utilizes an adjustable mechanical suspension system, the required clearance can be measured when the suspension system is adjusted to the height to which it would settle when occupied by a driver. In fact, the code is 393.76- and is found here. Because I was curious, I tried to search for the DOT regulation in the ad. ![]()
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |